Doorman Hardware Specifications

You can find a few information here about how to use

Power Supply

Thanks to the wide voltage converter, the Doorman S3 can operate with a supply voltage ranging from 5 to 30V DC.

The following tables outline the power consumption of different firmware variants when operating with a 24 V DC-input.

NOTE

The integrated RGB status LED draws approximately 4 mA when active. This is in addition to the values shown below.

Integration	Power Consumption
Home Assistant	20-22mA
Custom	TBD

The Bridge Rectifier will correct the Bus wire polarity. You don't have to worry about it.

The relay is a solid-state type, capable of switching loads up to 40V with a maximum current of 2.5A.

It is a pull-up button with a 10 kΩ resistor. You can connect the button to BTN and G screw terminals.